4.30 Hinge assembly 4 Replacement Procedures
PORTÉGÉ M780 Maintenance Manual (960-809) [CONFIDENTIAL] 4-79
Installing the Hinge assembly
The following describes the procedure for installing the hinge assembly. (See Figure 4-48
and 4-50.)
1. Set the hinge spacer, hinge assembly and cable holder in place and secure them
with the following screws.
M2.510.0B FLAT HEAD screw 2
2. Return the display counterclockwise in the original position and close the display.
3. Arrange the cables carefully as shown in the Figure 4-48 to the guides of the cable
holder.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
