User’s Manual 3-16
Hardware, Utilities and Options
Optional devices
Optional devices can expand the computer's capabilities and its versatility.
This section describes the connection or installation of the following
devices:
Cards/memory
■ ExpressCard
■ Bridge media slot
■ Secure Digital (SD) Card (SD memory card, SDHC memory card,
miniSD Card, microSD Card)
■ Memory Stick (Memory Stick, Memory Stick PRO, Memory Stick
PRO Duo)
■ xD picture card
■ MultiMediaCard
■ Additional memory module
Peripheral devices
■ HDD Kit (Serial-ATA)
■ Ultra Slim Bay HDD Adaptor II
■ External monitor
■ USB FDD Kit
■ eSATA
■ i.LINK (IEEE1394)
■ TOSHIBA Express Port Replicator
Other
■ Security lock
1. Turn on the computer while pressing the F2 key. When the
TOSHIBA
Leading Innovation >>>
screen appears, release the F2 key.
2. Set the TPM in the Security tab to Enabled.
3. Press the F10 key.
4. Set the Y key to accept the changes. The computer will restart.
In order to change the TPM setting when the Hide TPM setting is currently
set to Yes, switch the Hide TPM setting from Yes to No.
To connect optional devices (such as USB device or External monitor) to
the computer, be sure to check the shape and orientation of the connector
before connecting.
To Next Page
Loading...
