User’s Manual 6-14
Power and Power-Up Modes
Figure 6-5 Securing the latches
Disconnecting the Slice Expansion Battery
To disconnect the Slice Expansion Battery from the computer, follow the
steps as detailed below:
1. Save your work.
2. Turn the computer’s power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Close the display panel and turn the computer upside down.
5. Open the release latches in the direction of the arrows.
Figure 6-6 Releasing the latches
1. Latches
Always make sure the display panel is closed in Laptop mode before
turning the computer upside down.
1. Latches
To Next Page
Loading...
