User’s Manual 3-25
Hardware, Utilities and Options
8. Lift up the back of the keyboard, rotate it toward you and lay in face
down on the palm rest.
Figure 3-7 Rotate the keyboard
9. Remove the two screws and take off the memory module cover.
■ Never allow metal objects, such as screws, staples and paper clips, to
enter the computer or keyboard. Foreign metal objects can create a
short circuit, which can cause computer damage and fire, possibly
resulting in serious injury.
■ When you move the keyboard forward, do not touch the keys. Doing so
could cause misalignment. Hold the keyboard by the sides and lay it
gently on the palm rest.
■ The keyboard is connected to the computer by a keyboard ribbon
cable. Be careful not to apply tension to this cable when you lift up the
keyboard. Do not try to disconnect this cable.
1. Keyboard
Use a point size 1 Phillips screwdriver.
To Next Page
Loading...
