User’s Manual 6-17
Power and Power-Up Modes
Disconnecting the High Capacity 2nd Battery Pack
Follow the steps below to disconnect a High Capacity 2nd Battery Pack.
1. Save your work.
2. Turn the computer’s power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Close the LCD display panel and turn the computer upside down.
5. Open the latches in the direction of the arrows.
Figure 6-5 Releasing the latches
6. Lift off the High Capacity 2nd Battery Pack.
Figure 6-6 Removing the High Capacity 2nd Battery Pack
To Next Page
Loading...
