User’s Manual 4-23
Operating Basics
Taskbar Icon
TOSHIBA HDD Protection Properties
You can make the HDD Protection settings by using the TOSHIBA HDD
Protection Properties window. To open the window, click start point to All
Programs point to TOSHIBA point to Utilities and click HDD Protection
setting. The window can also be started from the icon on the Taskbar, or
from the Control Panel.
Figure 4-6 TOSHIBA HDD Protection Properties
HDD Protection
You can choose whether to enable or disable HDD Protection.
State Icon Description
Normal HDD Protection is enabled.
Protection HDD Protection is active. The HDD head is
at a safe position.
OFF HDD Protection is disabled.
To Next Page
Loading...
