Toshiba Portege Z10t-A Series - Turning on the Power

2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack.
Figure 2-6 Connecting the DC output plug to the computer (laptop mode)
1
2
1. DC IN 19V jack 2. DC output plug
Computer appearance depends on the model you purchased.
Figure 2-7 Connecting the DC output plug to the computer (tablet mode)
1
2
1. DC IN 19V jack 2. DC output plug
Computer appearance depends on the model you purchased.
3. Plug the power cord into a live wall outlet - the Battery indicator
should glow.
Turning on the power
This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the Power Condition Descriptions
section for more information.
Never keep your body too close to the computer while turning on the
power.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
User's Manual 2-7