The Touch Pad control buttons below the AccuPoint are used like the
buttons on a standard mouse - press the left button to select a menu item
or to manipulate text or graphics designated by the pointer, and press the
right button to display a menu or other function depending on the software
you are using.
Figure 4-5 AccuPoint
1. AccuPoint 3. AccuPoint left control button
2. AccuPoint right control button
AccuPoint precautions
Certain conditions can affect the on-screen pointer when using AccuPoint.
For example, the pointer may travel contrary to AccuPoint operation or an
error message may appear, if
You touch the AccuPoint during power-up.
You apply constant, soft pressure during power-up.
There is a sudden temperature change.
Strong stress is applied to the AccuPoint.
If an error message appears, reboot the computer. If an error message
does not appear, wait a moment for the pointer to stop, then continue
operation.
Replacing the cap
The AccuPoint cap is an expendable item that should be replaced after
prolonged use.
1. To remove the AccuPoint cap, gently dig the cap out (with finger).
User's Manual
4-5
To Next Page
Loading...
