Toshiba Portege Z10t-A Series - System Recovery and Setup Utility

A message will be displayed if any changes which may interfere with the
operation of the program are detected. Follow the instructions displayed on
screen in the message.
TOSHIBA Setup Utility
TOSHIBA Setup Utility is a BIOS setup utility that provides you a menu-
based user interface so that you can easily view and change BIOS
settings.
To enter the BIOS setup utility, follow the steps below:
1. Save your work.
2. Restart your computer.
3. Hold down the Volume down button until TOSHIBA Setup Utility is
loaded.
If TOSHIBA Keyboard Dock is connected, the BIOS setup utility can also
be launched through the keyboard operation.
1. Save your work.
2. Restart your computer.
3. Hold down the F2 key and then release this key one second after the
computer is power on.
To save the changes and exit the utility, press the F10 key and proceed by
selecting Yes with the keyboard dock or select Exit -> Exit Saving
Changes -> Yes. The computer will restart immediately.
Navigating the utility
TOSHIBA Setup Utility can be navigated through the touch screen or using
the provided Stylus Pen.
Some buttons on the computer are also designated to execute the
corresponding key function on the keyboard dock. Details are described as
follows:
Button Key Function
Windows Enter key Proceed or confirm
operation
Volume up Up arrow key Select an item
Volume down Down arrow key Select an item
Orientation lock - Turn on/off the virtual on-
screen keyboard
User's Manual 5-12