144
If Something Goes Wrong
Develop good computing habits
6 Click or touch the Restore point you want to use then
click or touch
Next.
The time stamp and description of each Restore point is
displayed.
At this point you can click or touch “Scan for affected
programs” to determine what the impact of using the
chosen Restore Point will be.
7 Verify that the Restore point you chose is the correct
one. If it is not, click or touch
Back to return to the
previous step.
8 Close all programs and save all open files.
9 Click or touch
Finish, and then Yes to begin the system
restore.
Your Windows
®
operating system configuration will now
be restored to the state it was in when the chosen
restore point was created, and then the device will be
automatically restarted.
Backing up your data or your entire device
with the Windows
®
operating system
The most valuable component of your device’s system is the
data you create and store on its internal storage drive. Since
problems with either hardware or software can make the
data inaccessible or even destroy it, the next most valuable
component of your device’s system may be a recent backup
of your data.
Fortunately, the Windows
®
operating system offers a
convenient way to back up your device or just your
important files to optional external writable optical disc
drives, or hard drives. An external hard drive is
recommended in case the internal storage drive fails. No
additional software is required. Most of the optical disc
drives built into recent Toshiba portable device models can
write to (or ‘burn’) as well as read from optical discs. External
optical disc writers are also widely available.
NOTE
To Next Page
Loading...
