Toshiba Portege Z20-B Series - Disabling or Enabling the Touch Pad; Connecting an External Device

65
Getting Started
Using the touch pad
❖ Temporarily disable the touch pad, so that it does not
respond to touch or button presses while you type. See
“Disabling or enabling the touch pad” on page 65.
❖ Adjust the sensitivity of the touch pad, so that it is less
responsive to accidental light taps and lighter finger
pressure.
Touch pad setting options vary by device model. The
touch pad settings are accessible through the Mouse
Properties option of the Windows
®
Control Panel. For
more information, please visit support.toshiba.com.
Disabling or enabling the touch pad
The touch pad is enabled by default. To enable/disable the
touch pad:
❖ Press the Touch pad ON/OFF ( ) button on the touch
pad
❖ Press the
FN + F9 keys
For more information, see “Disabling or enabling the touch
pad” on page 152.
Connecting an external device
Depending on your system, some models may include
USB 3.0 port(s). To distinguish these ports, please look
for the blue inset within the USB 3.0 port (if available).
You can easily attach an external device.
To do this:
1 Read the directions that came with the device to see if
you first need to install new software.
2 Connect the device’s video or USB cable to the port on
the device and to the device.
3 Connect the device’s power cable to a live electrical
outlet (if applicable).
4 Turn on the external device (if applicable).
Your device may automatically detect the external
device.
NOTE
NOTE