4.3 Battery pack 4 Replacement Procedures
PORTÉGÉ Z830/835/Satellite Z830 Maintenance Manual (960-883) [CONFIDENTIAL] 4-15
6. Disconnect the battery harness from the connector CN8110 on the system board.
7. Remove the following screws and the battery pack.
• M2.5×5C FLAT HEAD screw ×6 (Described as “5” in the figure)
CAUTION: When removing the battery pack, do not drop the screws on the computer.
Figure 4-5 Removing the battery pack (2)
NOTE: Dispose of used batteries according to the laws and ordinances of your local
authority.
Battery pack
CN8110
Battery harness
5
5
5
5
5
5
To Next Page
Loading...
