4 Replacement Procedures 4.12 Keyboard
4-48 [CONFIDENTIAL] PORTÉGÉ Z830/835/Satellite Z830 Maintenance Manual (960-883)
4.12 Keyboard
Removing the Keyboard
To remove the keyboard, follow the steps below and refer to Figure 4-22.
1. Remove the aluminum tape (AL TAPE) from the back of the cover assembly. (Refer
to the NOTE of the Page.4-50)
2. Turn the cover assembly face up and peel off the keyboard adhered to the insulator.
3. Peel off the insulator (INSU KB) from the cover assembly.
NOTE: Do not reuse the removed keyboard and INSU KB. Be sure to use new keyboard
and KB insulator.
Figure 4-22 Removing the keyboard
Keyboard
Insulator
(INSU KB)
To Next Page
Loading...
