4.6 RTC battery/LN board/3G card 4 Replacement Procedures
PORTÉGÉ Z830/835/Satellite Z830 Maintenance Manual (960-883) [CONFIDENTIAL] 4-27
Installing the RTC battery/LN board/3G card
To install the RTC battery/LN board/3G card, follow the steps below and refer to Figure 4-8
to 4-12.
1. Connect the 3G card to the connector CN2610 on the LN board.
2. Set the LN board to the cover assembly and secure it with the following screws.
• M2×3B S-THIN HEAD ×3
NOTE: When replacing the LN board with a new one, stick the insulators (INSU HNS
HOLD and INSU HNS BH R) and gasket (WiMAX model only) to the LN board
in place.
WiMAX model only
To Next Page
Loading...
