4 Replacement Procedures 4.13 Cover assembly/LCD assembly
4-52 [CONFIDENTIAL] PORTÉGÉ Z830/835/Satellite Z830 Maintenance Manual (960-883)
2. Release the latches and remove the hinge caps.
3. Remove the following screw and D SUB cover.
• M2×3B S-THIN HEAD ×1
4. Remove the following screws securing the cover assembly and LCD assembly.
• M2.5×3C S-THIN HEAD ×4
Figure 4-24 Removing the cover assembly/LCD assembly (2)
M2x3B S-THIN HEAD
Hinge cap L
Hinge cap R
D SUB cover
M2.5x3C S-THIN HEAD
M2.5x3C S-THIN HEAD
Latch
Latch
To Next Page
Loading...
