User’s Manual 4-32
Operating Basics
■ While recording video to DVD, please close all other programs.
■ Do not run software like a screen saver because it can put a heavy
load on the CPU.
■ Mp3 decoding and encoding are not supported.
2. Before recording the video to DVD
■ When you record DVD disc, please use only discs recommended by
the Drive manufacturer.
■ Do not set the working drive to a slow device like a USB1.1 hard
disk drive or it will fail to write DVD.
■ Do not perform any of the following actions:
• Operate the computer for any other function, including using the
mouse/TouchPad, or closing/opening the LCD panel.
• Bump or cause vibration to the computer.
• Use the Mode control button and Audio/Video control button to
reproduce music or voice.
• Open the DVD drive.
• Install, remove or connect external devices, including the
following: ExpressCard, SD card, USB device, external display,
i.LINK. devices and optical digital devices.
■ Please verify your disc after recording important data.
■ DVD-R/+R/+RW disc cannot be written in VR format.
■ Output to VCD and SVCD format is not supported.
3. About recorded DVDs
■ Some DVD-ROM drives for personal computers or other DVD
players may not be able to read DVD-R/+R/-RW/-RAM discs.
■ When playing your recorded DVD on your computer, please use
TOSHIBA DVD PLAYER software application.
■ When playing your recorded Blu-ray Disc on your computer, please
use WinDVD BD for TOSHIBA software application.
■ If you use an over-used rewritable disc, the full formatting might be
locked. Please use a brand new disc.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General