User’s Manual C-2
Wireless LAN
Radio Characteristics
Radio Characteristics of Wireless LAN Cards may vary according to:
■ Country/region where the product was purchased
■ Type of product
Wireless communication is often subject to local radio regulations.
Although Wireless LAN wireless networking products have been designed
for operation in the license-free 2.4GHz and 5GHz band, local radio
regulations may impose a number of limitations to the use of wireless
communication equipment.
The range of the wireless signal is related to the transmit rate of the
wireless communication device. Communications at a lower transmission
rate may travel larger distances.
■ The range of your wireless devices can be affected when the antennas
are placed near metal surfaces and solid high-density materials.
■ Range is also impacted due to “obstacles” in the path of the
transmission that may either absorb or reflect the radio signal.
Refer to the sheet "Information to the User" for regulatory information that
may apply in your country/region.
R-F Frequency
■ Band 2.4GHz (2400~2497 MHz ) for
802.11b/g/n
■ Band 5GHz (5150~5850 MHz ) for 802.11a/n
Modulation
Technique
■ DSSS-CCK, DSSS-DQPSK, DSSS-DBPSK
(IEEE 802.11b)
■ OFDM-BPSK, OFDM-QPSK, OFDM-
16QAMOFDM-16QAM ( IEEE 802.11a/g)
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General