User’s Manual B-1
Display Controller
Appendix B
Display Controller
Display controller
The display controller interprets software commands into hardware
commands that turn particular pels on or off.
A high-resolution external monitor connected to the computer can display
up to 2048 horizontal and 1536 vertical pixels at up to 16M colors.
The display controller also controls the video mode, which uses industry
standard rules to govern the screen resolution and the maximum number of
colours that can be displayed on screen.
Software written for a given video mode will run on any computer that
supports the mode.
The computer’s display controller supports all SVGA and XGA modes, the
most widely used industry standards.
■ Display modes which you can set are depending on the external
monitor which you use.
■ If you are running some applications (for example a 3D application or
video playback and so on), you may see some disturbance, flickering
or frame dropping on your screen. If that occurs, adjust the resolution
of display, lowering it until the screen is displayed properly. You could
also disable Windows Aero™ to help correct this situation.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
Need help?
General