Need help?Do you have a question about the Toshiba RAS-10SAHX and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | RAS-10SAHX |
| Category | Air Conditioner |
| Language | English |
Detailed dimensions and layout of the indoor unit.
Detailed dimensions and layout of the outdoor unit.
List of electrical parts for the indoor unit with specifications.
List of electrical parts for the outdoor unit with specifications.
Details on operating the unit in fan-only mode.
Explains the cooling mode operation and controls.
How to set and control the louvers.
Details on the dehumidification (dry) mode operation.
Explains the heating mode operation and controls.
How to set and control the louvers in heat mode.
Control of airflow during heating to prevent cool air.
How the unit selects operation mode based on temperature.
Details on the temporary auto mode functionality.
Information on the energy-saving ECONO mode.
ECONO mode operation during cooling.
ECONO mode operation during heating.
How the unit manages current to prevent overload.
Prevents overheating during heating operation.
Prevents freezing during cooling operation.
Controls indoor fan speed to prevent cool air blowing.
Procedure to melt ice on the outdoor heat exchanger.
Criteria for initiating the defrost cycle.
Manages the duration of the defrost operation.
Conditions that stop the defrost operation.
How the unit resumes operation after power loss.
Steps to enable the auto restart feature.
Steps to disable the auto restart feature.
How power failures affect timer operations.
Important safety precautions for installation.
Visual guide for unit placement and piping.
General steps and considerations for installation.
List and description of optional installation parts.
List of parts included in the installation kit.
Detailed installation steps for the indoor unit.
Guide for creating wall openings and mounting plates.
Procedures for electrical connections and power supply.
How to connect the wiring between units.
Instructions for installing refrigerant pipes and drain hose.
Final steps for mounting and securing the indoor unit.
How to properly set up the drainage system.
Detailed installation steps for the outdoor unit.
Recommended locations for outdoor unit installation.
How to connect the refrigerant pipes.
Process of removing air from the refrigerant system.
Connecting the electrical wiring to the outdoor unit.
How to check for refrigerant leaks.
Steps for performing an initial test run.
How to configure the auto restart function.
Initial checks before detailed troubleshooting.
Verifying the input power voltage.
Checking for proper wiring connections.
Explains normal operations that might seem like faults.
Identifying potential causes of issues.
Functions performed by the indoor unit's control system.
Understanding error codes and indicators.
Performing self-diagnosis using the remote control.
Interpreting diagnostic codes from the unit.
Step-by-step guides for diagnosing problems.
Troubleshooting steps for a unit that won't turn on.
Diagnosing issues after PC board replacement.
Troubleshooting for when the outdoor unit is inactive.
Diagnosing why only the compressor isn't working.
Troubleshooting for an inactive outdoor fan.
Diagnosing issues with the 4-way valve.
Troubleshooting for an inactive indoor fan.
Steps to diagnose remote control and indoor board issues.
Procedures for inspecting the main PC board.
Modifying the anti-restart timer duration.
Procedures for replacing indoor unit components.
Steps for replacing the microcomputer.
Procedures for replacing outdoor unit components.
Exploded view and parts list for the indoor unit.
Additional exploded view and parts list for the indoor unit.
Further exploded view and parts list for the indoor unit.
Exploded view and parts list for the outdoor unit.
To Next Page