Need help?Do you have a question about the Toshiba RAS-137SAV-E3 and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | RAS-137SAV-E3 |
| Category | Air Conditioner |
| Language | English |
Detailed technical specifications for cooling, heating, electrical characteristics, and physical dimensions of the indoor and outdoor units.
Crucial safety precautions for handling R410A refrigerant during installation and servicing to prevent hazards.
Covers the procedures and materials for installing refrigerant piping, including pipe types and joint methods.
Lists specialized tools required for R410A systems and general tools that can also be used for conventional refrigerants.
Step-by-step procedure for correctly recharging refrigerant, emphasizing proper handling and safety protocols.
Detailed visual representation and dimensions of the indoor unit, including air filters, heat exchangers, and mounting plates.
Visual breakdown of the outdoor unit, showing dimensions, fan guards, drain outlets, and connection points.
Electrical schematic illustrating the wiring connections for the RAS-137SKV-E3 and RAS-137SAV-E3 models.
Electrical schematic showing the wiring for the RAS-167SKV-E3 and RAS-167SAV-E3 models.
Lists electrical components of the indoor unit, including fan motors, sensors, and louver motors, with their types and specifications.
Details electrical components of the outdoor unit, such as reactors, fan motors, compressors, and coils, with their model names and ratings.
Illustrates the flow of refrigerant through the indoor and outdoor units for the RAS-137SKV-E3 / RAS-137SAV-E3 models.
Depicts the refrigerant flow for the RAS-167SKV-E3 / RAS-167SAV-E3 models, showing components and flow paths.
Outlines the control logic and functions of the indoor unit's MCU, including sensor inputs and communication.
Details the control architecture of the outdoor unit's inverter assembly, including MCU functions and component control.
Provides an overview of the air conditioner's control system, including indoor and outdoor unit roles and compressor control.
Explains various operating modes like Basic, Cooling/Heating, AUTO, DRY, ECO, QUIET, and fan control functions.
Describes how to set, cancel, and the behavior of the auto restart function during power failures.
Details the parts of the remote controller and how to operate various functions like ONE-TOUCH, AUTO, DRY, and timers.
Illustrates the placement and mounting of indoor and outdoor units, including clearances and piping routes.
Lists optional installation parts, accessories, and essential tools required for air conditioner installation.
Covers indoor unit installation, including placement, drilling, wiring, and drainage hose setup.
Details outdoor unit installation, including location, refrigerant piping, draining, evacuating, and wiring.
Outlines the procedures for performing a test operation, including gas leak tests and system checks.
Basic checks for power supply, voltage, and normal operation before proceeding with detailed troubleshooting.
Interprets flashing LED patterns on the indoor unit to identify specific error codes and potential faults.
Guides on using the remote controller in service mode to perform self-diagnosis and retrieve error codes.
Provides troubleshooting flows based on observed symptoms for indoor units, outdoor units, and wiring issues.
Describes methods for checking the resistance and continuity of key electrical components like PC boards, sensors, and motors.
Step-by-step instructions for replacing main parts of the indoor unit, such as the front panel and electric parts box.
Procedures for detaching and attaching main parts of the outdoor unit, including cabinets and covers.
Exploded view and parts list for the indoor unit model RAS-137SKV-E3, identifying components by number and description.
Detailed exploded view and parts list for the indoor unit RAS-137SKV-E3, covering various assemblies and components.
Exploded view and parts list for the outdoor unit RAS-137SAV-E3, detailing all components with their respective part numbers.
Diagram showing the layout of components on the P.C. board for the RAS-137SAV-E3, including sensor and terminal connections.
To Next Page