To Next PageTo Next Page
Need help?Do you have a question about the Toshiba RAS-137SKV Series and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | RAS-137SKV Series |
| Category | Air Conditioner |
| Language | English |
Precautions for using the new HFC refrigerant (R410A) during installation.
Instructions for safely disconnecting the appliance from the main power supply.
Essential safety warnings and potential hazards for installers.
Warnings regarding unit modification, placement, and electrical safety.
Advice on unit handling, installation environment, and noise considerations.
Mandates reporting appliance installation to the local power supplier.
Lists and describes optional parts required for installation.
Details the proper arrangement and securing of outdoor unit fixing bolts.
Specifies suitable locations for mounting the indoor unit.
Guidelines for optimal placement of the remote control receiver.
Instructions for making wall openings and mounting the installation plate.
Covers power supply requirements and wiring for the indoor unit.
Step-by-step guide for connecting the indoor unit's wiring.
Comprehensive guidance on installing refrigerant pipes and drain hoses.
Procedures for removing and fixing the drain hose and cap.
Steps to securely attach the indoor unit to the installation plate.
Instructions for properly installing the drain hose for effective water removal.
Specifies suitable locations for the outdoor unit, considering environmental factors.
Important cautions for installing the outdoor unit to ensure proper operation.
Step-by-step guide for flaring refrigerant pipes.
Instructions for properly tightening pipe connections with torque specs.
Guidance on shaping refrigerant pipes according to specific dimensions.
Process of removing air from the refrigerant system using a vacuum pump.
Instructions for connecting wiring to the outdoor unit terminals.
Procedure for testing refrigerant gas leaks after installation.
Steps to perform a test run of the air conditioner.
Instructions for setting selector switch for multiple indoor units.
How to select and set remote control A or B for specific units.
How to enable or disable the auto restart function.
