Need help?Do you have a question about the Toshiba RAS-13GKP-ES2 and is the answer not in the manual?
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Energy Efficiency Ratio (EER) | 3.21 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Indoor Unit Dimensions (W x H x D) | 798 x 293 x 230 mm |
| Type | Split System |
| Noise Level (Indoor) | 24 dB |
| Noise Level (Outdoor) | 49 dB(A) |
Essential safety precautions during installation.
Diagrams showing placement and connection of indoor/outdoor units.
Detailed instructions for connecting the refrigerant pipes.
Procedure for removing air and moisture from the refrigerant circuit.
Guide for diagnosing and resolving issues.
Initial checks before troubleshooting.
Verifying the input voltage for proper operation.
Checking for proper wiring between indoor and outdoor units.
Verifying operations based on control logic and table.
Initial assessment of operational status and potential faults.
Using the remote control to access self-diagnosis codes.
Visual guides for diagnosing and resolving common issues.
Flowchart for diagnosing lack of power or unit operation.
Flowchart for diagnosing issues after replacing the indoor PC board.
Flowchart for diagnosing outdoor unit operational issues.
Flowchart for diagnosing compressor operational issues.
Flowchart for diagnosing outdoor fan operational issues.
Flowchart for diagnosing 4-way valve issues in heating mode.
Flowchart for diagnosing indoor fan operational issues.
Flowchart for diagnosing remote control and indoor PC board issues.
Procedures and precautions for inspecting the PC board.
To Next Page
