Need help?Do you have a question about the Toshiba RAS-13SAX and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 3.5 kW |
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Weight | 9 kg |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 269 mm |
Details the physical components and dimensions of the indoor unit.
Details the physical components and dimensions of the outdoor unit.
Lists electrical specifications for indoor unit components.
Lists electrical specifications for outdoor unit components.
Describes the operation when only the fan is active.
Explains the cooling mode functionality and controls.
Details how to control the air louvers.
Explains the dry mode functionality and controls.
Describes the automatic mode operation.
Explains the temporary automatic operation mode.
Details the energy-saving ECONO mode operation.
Explains the control to prevent freezing in cooling mode.
Describes the automatic restart feature after power loss.
Step-by-step guide to enable the auto restart function.
Step-by-step guide to disable the auto restart function.
Explains behavior during power failures with timer settings.
Essential safety precautions for installation personnel and users.
Illustrates the correct placement and clearances for unit installation.
Lists optional and required parts for installation.
Details the installation steps for the indoor unit.
Instructions for making wall openings and mounting the installation plate.
Guidelines for electrical connections and wiring.
Detailed steps for connecting the electrical wiring.
Instructions for connecting refrigerant pipes and drain hose.
Steps for physically mounting the indoor unit.
Procedures for ensuring proper drainage.
Details the installation steps for the outdoor unit.
Steps for connecting the refrigerant pipes.
Procedure for evacuating air from the refrigerant lines.
Steps for connecting the outdoor unit wiring.
Additional installation procedures and checks.
How to perform a gas leak test.
Procedure for conducting a test run.
How to configure the auto restart feature.
Initial checks to perform before detailed troubleshooting.
Checks the supply voltage for normal operation.
Verifies correct wiring between indoor and outdoor units.
Explains operations that may seem abnormal but are normal.
Basic steps to identify the source of a problem.
Explains the functions of the indoor unit's control system.
Interprets error codes and self-diagnosis displays.
Provides step-by-step diagnostic flowcharts for common issues.
Troubleshooting guide for complete lack of power.
Specific checks after replacing the indoor PC board.
Troubleshooting guide for when the outdoor unit fails to operate.
Troubleshooting guide for compressor-specific issues.
Troubleshooting guide for outdoor fan motor issues.
Troubleshooting guide for indoor fan motor issues.
Guide to diagnose issues with the remote control and PC board.
Procedures for inspecting the main PC board.
Diagram showing the layout of components on the PC board.
Method to modify the anti-restart timer duration.
Instructions for disassembling and replacing parts of the indoor unit.
Procedures for replacing the microcomputer and related components.
Instructions for disassembling and replacing parts of the outdoor unit.
Exploded view and parts list for the indoor unit.
Exploded view and parts list for the outdoor unit.
To Next Page
