– 14 –
7-4. AUTO Operation
(MODE of the remote control : AUTO)
(1) One of the 2 modes, Cooling or Dry is selected
according to room temperature at which opera-
tion is to start, as shown in Fig. 7-4-1. The Fan
mode will continue until room temperature reaches
a level at which another mode is selected.
7-4-1. Temporary Auto
When the TEMPORARY button is pushed, the set tem-
perature is fixed at 24°C and controlled in accordance
with the chart shown in Fig. 7-4-1.
Fig. 7-4-1
Cooling mode
Cooling mode
Dry mode
+4
+1
(The same cooling mode as the room temperature control is set at set temp.)
The Louver moved downward.
(The same cooling mode as the room temperature control is set at set temp. )
(The same dry operation as the room temperature control is set at set temp. )
(Room temp. – Set temp.)
To Next Page
Loading...