– 47 –
FILE NO. SVM-02001
8-7-3. Auto Restart Setting
This product is designed so that, after a power failure,
it can restart automatically in the same operating mode
as before the power failure.
<How to Set the Auto Restart>
• Press and hold the TEMPORARY button for about
3 seconds. After 3 seconds, the electronic beeper
makes three short beeps to tell you the Auto
Restart has been selected.
• To cancel the Auto Restart, follow the steps
described in the section Auto Restart Function of
the Owner’s Manual.
Information
The product was shipped with Auto Restart function
in the off position. Turn it on as required.
To Next Page
Loading...