20
EN
Removing the moving panel
1. Open the moving panel, and support the moving panel by the panel support on the right side.
2. Remove the lead wire cover on the right side. (1 screw)
3. After removing a screw of the left-side panel stopper, slide the panel stopper downwards.
4. Grasp both sides of the moving panel, return the panel support to its original position, and press the left-side arm inwards with
your finger.
5. Pull out the moving panel towards the left side to remove.
Lead wire cover
Screw
Panel stopper
Screw
To Next Page
Loading...
