Toshiba RAS-16PKVP-ND - Usual Maintenance Procedures; Cleaning Indoor Unit and Remote Controller; Long-Term Storage Maintenance; Pre-Operation Checks

21 EN
Attaching the moving panel
1. Grasp both sides of the moving panel, and insert the right-side joint first.
2. Insert the left-side joint, raise the panel stopper upwards, and secure with the screw.
3. Insert the top edge of the lead wire cover into the front panel, and secure with a screw.
Left-side joint Right-side joint
Panel stopper
Screw
Screw
Lead wire cover