Do you have a question about the Toshiba RAS-3M26GAV-E and is the answer not in the manual?
Brand | Toshiba |
---|---|
Model | RAS-3M26GAV-E |
Category | Air Conditioner |
Language | English |
Ensure qualified person installs unit to prevent water leak, shock, or fire.
Avoid strong cooling or prolonged breeze for health. Contact dealer for abnormalities.
Do not move or repair yourself due to high voltage. Ask dealer for repairs.
Identifies parts of the indoor unit and connecting duct.
Identifies parts of the outdoor unit.
The device used to control the air conditioner from a distance.
Allows operation without the remote controller using the switch panel.
How to set the appropriate voltage for the unit.
Buttons for starting, stopping, mode, and fan speed selection.
Buttons for timers, memory, presets, and clearing settings.
Buttons for High Power, ECO Timer, and Auto operation.
Shows mode, temperature, fan speed, and timer/clock information.
Indicates High Power, Memory, and ECO Timer status.
Shows when the remote is communicating with the indoor unit.
Instructions for inserting and replacing remote controller batteries.
Procedure to set and correct the current time on the remote.
Warnings regarding controller use, signal interference, and sunlight exposure.
Guide to mounting the remote controller holder on walls or pillars.
How to attach and detach the remote from its holder.
Unit automatically selects cooling, heating, or fan based on room temperature.
Unit switches modes automatically based on detected conditions.
How to operate in Cool, Heat, or Fan only modes.
How to use the unit for dehumidifying the room.
Instructions for enabling and disabling rapid cooling/heating.
Program the unit to turn on or off at specific times.
Stop operation during sleep and resume later.
Program combined timers for daily use.
How to stop any programmed timer functions.
Using the MEMO button to save favorite operational configurations.
Using the PRESET button to activate previously memorized settings.
How to allow the unit to restart automatically after a power interruption.
How to turn off the automatic restart feature.
How the unit selects modes based on temperature and conditions.
Specific cooling/heating behaviors of these modes.
Tips for efficient temperature management and airflow.
Importance of clean filters and effective timer use.
Instructions for cleaning the remote control unit.
Steps for units not to be used for over a month.
How to remove and clean the return air grille.
Recommended intervals and method for cleaning air filters.
Unit protection, restart after power loss, and inter-room mode priority.
Details on heating characteristics and recommended operating ranges.
Risks of improper installation and places to avoid.
Tips to minimize operational noise and vibration.
List of common problems to check before contacting a dealer.
Explains noises, smells, indicator lights, and outdoor unit issues.
Issues with changing settings or signal transmission.
Problems with the remote display or receiving tones from the unit.