Fig. 8-3-1
Secure the outdoor unit with fixing bolts and nuts if the unit is likely to be exposed to a strong wind.
Use
∅ 8 mm or ∅ 10 mm anchor bolts and nuts.
·
·
If it is necessary to drain the defrost water, attach drain nipple
9 and cap water proof 10 to the
·
bottom plate of the outdoor unit before installing it.
– 51 −
Parts name
Refrigerant piping
Liquid side : ∅6.35 mm
Gas side : 9.52 mm
Pipe insulating material
(polyethylene foam, 6 mm thick)
Putty, PVC tapes
Part
Code
A
B
C
Q'ty
One
each
1
One
each
∅
12.70 mm∅
(10,13k Series)
(16k Series)
FILE NO. SVM-12051
10-2. Installation
10-2-1. Optional installation parts
Fixing bolt arrangement of outdoor unit
Drain outlet
Air inlet
Air outlet
125 mm
108 mm
Ø25 mm
29 mm
330 mm
106 mm
121 mm
99 mm600 mm
∗ When using a multi-system outdoor unit is used, refer to the installation
manual provided with the model concerned.
∗ Drain nipple and cap water proof
are packed in outdoor unit.
To Next Page
Loading...
