To Next PageTo Next Page
Need help?Do you have a question about the Toshiba RAS-B10N4KVRG-E1 and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | RAS-B10N4KVRG-E1 |
| Category | Air Conditioner |
| Language | English |
Details specific parts available for optional installation.
Instructions for securing the outdoor unit with fixing bolts.
Guidelines for selecting a suitable location for the indoor unit.
Recommendations for optimal placement for signal reception.
Procedures for creating holes and mounting the installation plate.
Covers fixing the drain hose and removing the drain cap.
Instructions for cutting the front panel for pipe and hose connections.
Guidance on shaping and insulating connecting pipes and drain hoses.
Procedure for securely inserting the drain cap to prevent leaks.
Guidance on bending and connecting pipes for left-hand configurations.
Instructions for securing the indoor unit directly to the wall.
Criteria for selecting an appropriate location for the outdoor unit.
Installation guidelines for regions with specific weather conditions.
Best practices and tools for accurately adding refrigerant.
Procedure for installing rubber caps for proper defrost water drainage.
Guide to installing the drain nipple and connecting a drain hose.
Detailed steps and specifications for flaring refrigerant pipes.
Safety and operational guidelines for handling packed valves.
Step-by-step instructions for the pump down procedure.
Procedures for connecting power supply and cables to both units.
Steps for correctly attaching the air inlet grille to the indoor unit.
Recommended method for power supply input via the outdoor unit terminal block.
Optional method for power supply input via the indoor unit terminal block.
Diagram showing power input connection at the outdoor unit terminal block.
Diagram showing optional power input connection at the indoor unit terminal block.
Details on power supply input at the outdoor unit terminal block for IMS.
Wiring diagram for Inverter Multi System (IMS) power input at the outdoor terminal block.
Procedure for checking for gas leaks at connection points.
Instructions on how to initiate a test run mode for the air conditioner.
Guide to setting remote controls for multiple indoor units.
How to enable or disable the auto restart function after power failure.
Step-by-step guide on how to attach decorative fabric to the air inlet grille.
Conditions and restrictions for reusing existing R22/R410A pipes with R32 models.
Procedures for pipe curing and changing flare nut/machining sizes.
