Installation Manual
– 8 –
EN
4 Installation
CAUTION
Strictly comply with the following rules to prevent damage of the
indoor units and human injury.
• Do not put a heavy article on the indoor unit or let a person get on it.
(Even units are packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the
indoor unit unpacked by necessity, use buffering cloth or other
material not to damage the unit.
• To move the indoor unit, hold the hooking brackets (4 positions) only.
• Do not apply force to the other parts (refrigerant pipe, drain pan,
foamed parts, resin parts or other parts).
• Hanging bolt pitch of air intake chamber side is different (centre
position), make sure not to make mistake to install the setting direction.
• Carry the package by two or more persons, and do not bundle it with
plastic band at positions other than specified.
• To install vibration isolation material to hanging bolts, confirm that it
does not increase the unit vibration.
External dimensions
Hanging bolt
Model type A B C
07,10,13 type 770 700 650
16 type 970 900 850
22,24 type 1,170 1,100 1,050
Hanging bolt pitch A
80
80
100
113
90 knockout hole
(For air taking-in)
40
Electrical control box
40
22
Hanging bolt pitch 370
Unit external dimension 450
Unit external dimension B
C
(Outside)
125 (Outside)
56
Unit external
dimension
210
25 or less
(Only the position of
an access cover.)
Access cover
187
155
58
388
300
260
110
320
37
173
Wires
drawing-out port
Refrigerant pipe
connecting port
(Liquid side)
Drain pipe
connecting port
Refrigerant pipe
connecting port
(Gas side)
(Unit: mm)
35
Some models have no
drain guard here.
EN-15 EN-16
ML.book Page 8 Wednesday, March 14, 2018 10:28 AM
To Next Page
Loading...
