What does 'Outdoor unit discharge temp. error' mean for Toshiba RAV-GM901CTP-E?
The 'Outdoor unit discharge temp. error' in your Toshiba Air Conditioner means that an error was detected in the discharge temp. releasing control.
What does 'Outdoor unit current detect circuit error' mean for Toshiba Air Conditioner?
The 'Outdoor unit current detect circuit error' in your Toshiba Air Conditioner means that abnormal current was detected in AC-CT or a phase loss was detected.
What does 'Outdoor unit compressor lock' mean for Toshiba RAV-GM901CTP-E Air Conditioner?
The 'Outdoor unit compressor lock' error in your Toshiba Air Conditioner means that compressor lock was detected.
Why is white mist coming from my Toshiba RAV-GM901CTP-E Air Conditioner?
If white, misty, cold air or water comes out of your Toshiba Air Conditioner, it's likely due to one of these reasons: the outdoor unit's fan has automatically stopped for defrosting, the solenoid valve is operating during the start or end of defrosting, or the outdoor unit is preparing to start running.
What does 'Outdoor unit position error' mean for Toshiba RAV-GM901CTP-E Air Conditioner?
The 'Outdoor unit position error' in your Toshiba Air Conditioner means that a compressor motor position error was detected.
What does 'Outdoor unit inverter Idc activated' mean for Toshiba RAV-GM901CTP-E?
The 'Outdoor unit inverter Idc activated' error in your Toshiba Air Conditioner means that short-circuit protection for compressor drive circuit devices (G-Tr/IGBT) was activated.
What does 'Outdoor unit fan error' mean for Toshiba RAV-GM901CTP-E Air Conditioner?
The 'Outdoor unit fan error' in your Toshiba Air Conditioner means that an error (overcurrent, locking, etc.) was detected in the outdoor unit fan drive circuit.
What does 'Outdoor unit outside air temp. sensor error' mean for Toshiba RAV-GM901CTP-E?
If your Toshiba Air Conditioner displays 'Outdoor unit outside air temp. sensor error', it means there is an open-circuit or short-circuit of the outdoor air temp. sensor. Operation continued.
What causes 'Abnormal external input into indoor unit (interlock)' error in Toshiba RAV-GM901CTP-E?
The 'Abnormal external input into indoor unit (interlock)' error in your Toshiba Air Conditioner is caused by incorrect external input into CN80 from external devices or the outdoor unit P.C. board, leading to an abnormal stop.
What does 'Indoor unit capacity not set' mean for Toshiba RAV-GM901CTP-E?
The 'Indoor unit capacity not set' error for your Toshiba Air Conditioner means the indoor unit capacity has not been set. This is due to an indoor address setting error.
General| Brand | Toshiba |
|---|---|
| Model | RAV-GM901CTP-E |
| Category | Air Conditioner |
| Language | English |
Essential safety rules and considerations for operating the air conditioner.
Precautions for safe transportation and storage of the air conditioner and its packaging.
Safety measures for installation, operation, repairs, and relocation of the unit.
Identification of components specific to the indoor unit.
Identification of components specific to the outdoor unit.
Explanation of the icons and displays on the remote controller.
Details on how to use the buttons and functions of the remote controller.
Steps for initial setup and requirements before operating the unit.
Instructions on selecting and starting different operation modes.
Specific instructions for using the 8°C heating operation feature.
How to set and manage the off timer and on timer functions.
How to adjust the horizontal and vertical airflow direction for optimal comfort.
Instructions for starting/stopping swing and adjusting horizontal airflow.
Steps to enable and configure the power saving mode for energy efficiency.
Procedure for cleaning the air filters to maintain performance.
Steps for preparing the unit for extended periods of non-use.
Actions to take before the cooling season begins.
Regular checks to ensure proper functioning and prevent issues.
Table of common symptoms and their potential causes for troubleshooting.
Checks to perform before starting the air conditioner operation.
How to check and confirm stored error logs for diagnostics.
Recommended and prohibited places for installing the air conditioner.
How to manage noise and vibrations during installation.
Key performance and physical characteristics of the air conditioner.
To Next Page
