– 67 –
6 Repeat procedures 4
→→
→→
→ 5
→→
→→
→ 4
→→
→→
→ 5.
Indicators “Operation” (green), “Timer” (green), and “Ready” (orange) in the wireless receiver section flash
in approx. 10 seconds, and the air conditioner starts operation. If any of these indicators does not flash,
repeat procedures 2 to 5.
7 Upon completion of the test run, push “ON/OFF” button to stop operation.
<Overview of test run operations using the
wireless remote controller>
Cooling test run:
ON/OFF → 17 °C → 18 °C → 17 °C → 18 °C → 17 °C → 18 °C → 17 °C → (test run) → ON/OFF
Heating test run:
ON/OFF → 30 °C → 29 °C → 30 °C → 29 °C → 30 °C → 29 °C → 30 °C → (test run) → ON/OFF
To Next Page