Time, Temperature and Mode Selection when Programming the RBC-AMS41E
Setting Present Time and Day of Week
Press and hold SCHEDULE for 4 seconds, (setting appears on screen)
Press DAY until the correct day of the week is indicated
Press TIME up and down keys to set current time
Press SET to confirm entries. Day and time now set.
Setting Scheduled Operations with Mode and Temperature functionality
12. Press PROGRAM, display will flash PG-01
13. Press DAY until Monday is selected then Press SET
14. Press SET, PG-01 will stop flashing
15. Press TIME up and down keys until required ON TIME is displayed
16. Press MODE key selecting desired mode of operation
17. Press TEMPERATURE up & down arrows to set desired temperature
18. Press SCHEDULE until blinks (symbol denotes start operation)
19. Press SET
20. Press UNIT, PG-02 will appear
21. Press SET, PG-02 will stop flashing
22. Press TIME up and down keys until required OFF TIME is displayed
23. Press SCHEDULE until blinks (symbol denotes stop operation)
24. Press SET and then PROGRAM
The bar now underlining MONDAY indicates that times have now been entered
Copying From Monday to Remaining Days of Week
9. Press PROGRAM, display will flash PG-01
10. Press DAY key and select Monday
11. Press SET
12. Press UNIT key until PG-CP appears (program copy)
13. Press SET
14. Press DAY and select Tuesday
15. Press SET (Monday times have now been copied into Tuesday) to continue copying return to step 4
16. Press PROGRAM
The times have now been programmed into the controller
N.B. To activate the programmed times press SCHEDULE, will flash,
Press SET, remains displayed, scheduled programming now activated.
To deactivate the programmed times press SCHEDULE, will flash,
Press CL, disappears from screen.
To Next Page
Loading...
