Toshiba RBC-AMS51E-EN - Page 15

–14–
Lite-Vision plus Remote Controller
Owner’s Manual
EN
 Turning on/off the louver swing
To swing the louver (the display while the louver swing is on)
To stop the louver swing (the display after the louver swing is stopped)
1 Push the “ Swing ON” [ F2]
button on the “2.Individual louver” screen.
2 Push the [ CANCEL] button.
ÆThe screen returns to the menu screen.
1 Push the “ Swing OFF” [ F2]
button on the “2.Individual louver” screen.
2 Push the [ CANCEL] button.
ÆThe screen returns to the menu screen.
NOTE
• “No function” appears on the display for the models not equipped with the individual louver setting.
• Pushing [
∧] / [ ∨ ] while the louver is swinging stops swinging and sets the louver in the position (1).
• Refer to “Information” Group control. (page 38)
• “ ” appears on the display when the Louver lock function is used. Individual louver setting is not available for the
louver set to be locked. (page 16)
Individual louver
Return
Swing OFFLouver No.
Louver
24
3
1
Swing ON
Individual louver
Return
Swing ONLouver No.
Louver
24
3
1
Swing OFF
+00EH97062101_00EN.book Page 14 Saturday, March 12, 2011 8:24 AM