Toshiba RBC-AMS51E-EN - Group Control

–38–
Lite-Vision plus Remote Controller
Owner’s Manual
EN
 Group control
The following functions can be set individually for each unit when the group control is used:
“Wind direction setting”, “Individual louver setting”, “Swing type setting”, “Louver lock setting”, “Auto grille setting”
Operate the remote controller according to the procedure below before setting each function.
1 Select the group-controlled function on the
menu screen, then push the “
Set” [
F2] button.
2 Push the “ unit” [ F1] button to
select the unit to set.
ÆThe selected unit changes as follows each time
the button is pushed:
3 Push the “ Set” [ F2] button.
ÆThe setting display for the selected unit
appears.
4 Push the [ CANCEL] button.
ÆPushing the [ CANCEL] button returns to
the previous screen.
ÆPushing the [ CANCEL] button when setting
“Swing type”, “Louver lock”, or “Auto grille”
shows “ SETTING” on the screen.
• The number (address) of the selected unit appears
on the upper left of the screen, unless “All” is
selected for the unit selection.
• “All” is not available for some settings.
Return
Unit Set
Wind direction
1
–
1
1
–
2
1
–
3
1
–
4
1
–
5
ALL
Set
Unit
1-1 1-2 ALL
Set
Return
Unit Set
Wind direction
1
–
1
1
–
2
1
–
3
1
–
4
1
–
5
ALL
Return
Wind direction
Swing ON
Louver
1–1
+00EH97062101_00EN.book Page 38 Saturday, March 12, 2011 8:24 AM