–32–
Lite-Vision plus Remote Controller
Owner’s Manual
EN
To adjust the clock
Screen contrast
Adjust the contrast of the LCD.
1 Push the [ ∧] / [ ∨] button to select
“1. Clock” on the “Initial setting” screen,
then push the “ Set” [
F2]
button.
2 Push the [ ∧ ] / [ ∨] button to select
the year, month, date, and time.
ÆPush the “ -” [ F1] / “
+” [ F2] button to set the value.
3 Push the [ MENU] button.
ÆThe screen returns to the “Initial setting” screen.
The clock display appears on the upper right of the
screen.
• The clock display blinks if the clock setting has
been reset due to power failure or other cause.
The available date range is from January 1
st
, 2010 to December 31
st
, 2099.
1 Push the [ ∧ ] / [ ∨] button to select
“3.Screen contrast” on the “Initial setting”
screen, then push the “ Set” [
F2] button.
2 Push the “ -” [ F1] / “
+” [
F2] button to adjust.
3 Push the [ MENU] button.
ÆThe screen returns to the “Initial setting” screen.
Clock
Date
Month
Year
Hour
Minute
01
01
2010
00
00
–
+
Return Fix
Set
24
Room A
12:00
Mode
Fan Speed
Cool
Initial setting(1/2)
1.Clock
2.Name of room
3.Screen contrast
4.Backlight
5.Key lock
Set
Return
Set
– +
Screen contrast
–+
+
–
Return Fix
+00EH97062101_00EN.book Page 32 Saturday, March 12, 2011 8:24 AM