Toshiba RBC-AMS51E-EN - Page 23

–22–
Lite-Vision plus Remote Controller
Owner’s Manual
EN
To copy the settings of the previous day
NOTE
Push the [ CANCEL] button to stop the setting procedure. No setting has been made and the screen returns to the
“Schedule timer” screen.
 Holiday setting
* Set the days of the week when the schedule timer is not used.
NOTE
• Operations other than the Schedule timer, such as operations on the remote controller or using the central control
are available on the days set as “Holiday”.
• Push the [ CANCEL] button to stop the setting procedure. No setting has been made and the screen returns to
the “Schedule timer” screen.
1 Push the [ MONITOR] button on the day
selection screen.
2 Push the “ Yes” [ F1] button.
ÆThe schedule of the previous day is copied.
ÆPush the “
No” [ F2] button to
return to the “Condition setting” screen.
1 Push the [ ∧] / [ ∨] button to select
“3. Holiday setting” on the “Schedule timer”
screen.
2 Push the “ Set” [ F2] button.
3 Push the “ Day” [ F1] button to
select the day, then push the “
Set” [
F2] button to set.
ÆPush the “ Set” [ F2] button so
that “z” is displayed on the day when the
Schedule timer is not used.
4 Push the [ MENU] button.
ÆThe screen returns to the “Schedule timer”
screen.
Schedule timer(1/3)
Reset
Day
1.
-- -- : -- -- °C
2. -- -- : -- -- °C
3. -- -- : -- -- °C
4. -- -- : -- -- °C
Return Fix
: Tuesday
Yes
No
Copy the previous day setting?
Yes No
Schedule timer
Return
Schedule timer
1.Schedule timer
ON / OFF
2.Condition setting
Return Fix
3.Holiday setting
Set
Day
Set
Set
Holiday setting
Day Set
Return Fix
Mon Tue Wed Thu Fri Sat Sun
+00EH97062101_00EN.book Page 22 Saturday, March 12, 2011 8:24 AM