Toshiba RBC-AMS51E-EN - Energy Saving Schedule; Programming Energy Saving Times

–28–
Lite-Vision plus Remote Controller
Owner’s Manual
EN
Energy saving schedule
NOTE
• The time of the schedule setting for the Save operation can be set within the range from 0:00 to 23:50 at 10 minute
intervals.
• The save ratio of the schedule setting for the Energy saving operation can be selected only from “random (*1)”, “50%”,
or “0%”.
• Adjust the clock before setting the energy saving schedule. (page 31)
• The lower save ratio is applied when the different save ratios are set at the same hours on the schedule.
*1: Random is the value set at “Energy saving ratio”.
1 Push the [ ∧] / [ ∨] button to select
“3. Energy saving schedule” on the “Energy
saving operation” screen, then push the
“ Set” [
F2] button.
ÆThe “Clock setting” screen appears if the clock
has not been adjusted. (page 31)
2 Push the [ ∧] / [ ∨] button to set the
time and energy saving ratio.
ÆPush the “ ←” [ F1] /
”
→” [ F2] button to set the
value.
3 Push the [ MENU] button.
ÆThe screen returns to the “Energy saving
operation” screen.
Energy saving operation
1.Energy saving operation
2.Energy saving ratio
3.Energy saving schedule
ON / OFF
Return Fix
Set
Set
Energy saving schedule
Return Fix
1. -- : -- ~ -- : -- **%
2.
-- : -- ~ -- : -- **%
3.
-- : -- ~ -- : -- **%
4.
-- : -- ~ -- : -- **%
Energy saving schedule
Return Fix
1. 08:00 ~ 12:00 80%
2.
12:00 ~ 13:00 50%
3.
13:00 ~ 17:00 80%
4.
19:00 ~ 08:00 50%
+00EH97062101_00EN.book Page 28 Saturday, March 12, 2011 8:24 AM