–35–
Lite-Vision plus Remote Controller
Owner’s Manual
Press & hold 4sec.
Set the “press and hold” operation for the [ ON / OFF] button.
1 Push the [ ∧] / [ ∨] button to select
“8.Press & hold 4sec.” on the menu screen,
then push the “ Set” [
F2]
button.
2 Push the [ ∧] / [ ∨] button to select
“ON” or “OFF”.
3 Push the [ MENU] button.
ÆWhen “ON” is selected, the air-conditioner
starts / stops running when the [ ON / OFF]
button is pressed and hold 4 seconds.
ÆWhen “OFF” is selected, the air-conditioner
starts / stops running when the [ ON / OFF]
button is pressed.
Initial setting(2/2)
6.Header/Follower
7.Language
8.Press & hold 4 sec.
Set
Return
Press & hold 4sec.
ON
OFF
Return Fix
+00EH97062101_00EN.book Page 35 Saturday, March 12, 2011 8:24 AM
To Next Page
Loading...
