Toshiba RBC-AMS54E - Page 30

–29–
Owner’s Manual
Energy saving ratio
Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting the
setting operation.)
NOTE
• Cooling / heating performance may be reduced a little because its power is saved during the Energy saving operation.
• “ ” appears on the display when the Energy saving operation is activated.
• The Energy saving operation cannot be set on the Follower remote control when the dual remote control system is
used.
• Adjust the clock before setting the Energy saving schedule operation. (page 34)
• The remote control may not be used for setting the Energy saving operation depending on the settings of the central
control remote control or the outdoor unit.
• The Energy saving schedule operation is not available when the clock display is blinking (the clock has not been
adjusted).
1 Push the [ ∧] / [ ∨] button to select
“2. Energy saving ratio” on the “Energy
saving operation” screen, then push the
“ Set” [
F2] button.
2 Push the “ %+” [ F1] /
“ %-” [
F2] button to set the
value.
The Energy saving ratio can be set within the
range from 50% to 100% by 1 %. The lower the
value is set, the higher the power saving effect
becomes.
3 Push the [ MENU] button.
“ Setting” appears on the screen, then the
screen returns to the “Energy saving operation”
screen.
Energy saving operation
1.Energy saving operation
2.Energy saving ratio
3.Energy saving schedule
ON / OFF
Return Fix
Set
Set
Energy saving ratio
Energy saving ratio
75%
%
+
%
–
Return Fix
%
+
%
–