Toshiba RD-XS34 - Setting of Picture and Sound Quality for Recording

164
HDD Format
HDD
Initializes the HDD.
Normally it is not required to initialize the HDD. However
when the HDD does not function correctly, initializing the
HDD may solve the situation. If you initialize the HDD, all
titles and Library information stored in the HDD are
permanently deleted.
1) Press the / buttons to select “Start”,
then press the ENTER button.
2) Confirm the message, press the /
buttons to select “Start”, and then press the
ENTER button.
Initialization of the HDD starts.
If you want to cancel the initializing, select
“Cancel”.
DVD-RAM physical format
DVD-RAM
See page 29.
Picture quality setting
SP
LP
MN
Auto
Setting of picture and sound quality for recording
Sound setting
D/M1 D/M2 L-PCM
DVD
Yes
Yes
Yes
Yes
HDD
Yes
Yes
Yes
Yes
DVD
Yes
Yes
Yes
Yes
HDD
Yes
Yes
Yes
Yes
DVD
No
No
Yes
Yes
HDD
No
No
Yes
Yes
0
HDD Format
Start Cancel
Entire disc contents including
library will be erased
if disc is formatted. Proceed?
Format %
e.g.
Customizing the function settings (Continued)
Function Setup
RD-XS34SB_Ope_E_p149-164 12/18/04, 5:53 PM164