62
Playback
Playing a DVD video disc
You can also play VIDEO CDs, audio CDs or finalization processed DVD-R/RW discs in the same manner.
To play recorded contents, follow the instructions on
page 57.
Preparation
•Turn on a TV or audio system and select the corresponding input source that the recorder is connected to.
• Load a disc you want to play. (
page 20)
1
Press DVD.
The DVD indicator on the front panel illuminates.
This status indicates that the recorder is ready to play a
disc in the disc tray (DVD mode).
2
Press PLAY.
Playback starts.
• Depending on the disc, playback starts automatically
by loading the disc.
• The recorder may take a short time to start playback.
This occurs because the recorder is reading the data
of a disc.
To stop playback
Press STOP.
To pause playback (still playback)
Press PAUSE.
To resume normal playback, press the PLAY button or
the PAUSE button.
Note
• Sound is muted during still mode.
Note
• DVD video disc provides high resolution pictures and a lot of information. Because of this, you may notice some fine picture
noises on TV screen, which you have never seen with regular broadcast TV programme. While the amount of noise depends
on the TV you use with the recorder, you should generally reduce the sharpness adjustment on your TV when viewing DVD
video discs.
STOP
PAUSE
PLAY
DVD
TIMESLIP
HDD DVD
EASY
NAVI
INSTANT SKIPINSTANT REPLAY
PLAYSTOPPAUSE
LIBRARY
REC MENU EDIT MENU
CONTENT MENU
ANGLE
OPEN/CLOSE
SUBTITLE
AUDIO
CHANNEL
TOP MENU
MENU
RETURN
DVD
F
R
A
M
E
/
A
D
J
U
S
T
P
I
C
T
U
R
E
S
E
A
R
C
H
S
K
I
P
S
L
O
W
ENTER
DVD-VIDEO
VCD CD
DVD-RDVD-RW
Start
RD-XS34SB_Ope_E_p062-070 12/18/04, 5:44 PM62
To Next Page
Loading...
