33
Playback
Recording
Editing
Function setup
Others
Introduction
Library
Setting for recording on a DVD-R/RW disc in Video mode
This setting is necessary to play the contents on a DVD-R/RW disc with other DVD players.
Items to set up
When recording in Video mode, there are some
restrictions by DVD-Video standard.
Therefore, it is necessary to set up these items below.
Set up the items in advance before copying contents
from the HDD to a DVD-R/RW disc.
DVD compatible mode
Only the left channel sound and the right channel
sound are available for recording in Video mode
under DVD-R/RW standard.
Off: This is not for recording on a DVD-R/
RW disc. Depending on Picture/Audio
settings, making DVD Video may not
be possible. (When recording directly
on a DVD-R/RW disc of DVD-Video
mode, the recording proceeds with
“On (Mode I)” on even though “Off” is
set.)
On (Mode I): In multichannel broadcasting, only
the left channel sound is recorded.
On (Mode II): In multichannel broadcasting, only
the right channel sound is recorded.
Aspect ratio
“4:3” and “16:9” cannot be mixed in one title.
Therefore, set the aspect ratio before recording.
4:3: Set the aspect ratio to 4:3
16:9: Set the aspect ratio to 16:9
DVD-Video: CHP create
This is the setting to divide a title into some
chapters. It is convenient to skip scenes.
Off: Chapter dividing is not available.
5 min, 10 min, 15 min, 20 min:
Select an interval for chapter dividing.
Note
• When the number of chapters reaches a limit, chapters are
not divided anymore. The limit number of chapters is
dependent on conditions of a DVD-R/RW disc.
1
Press SETUP.
SETUP menu appears.
2
Select “DVD recorder operation”
and press ENTER.
3
Select “Aspect ratio (Video
mode)” and press ENTER.
4
Press / to select an item and
press ENTER.
Set up “DVD compatible mode” and “DVD-Video:
CHP create” as step 3, 4.
How to set up
Recording
e.g.
e.g.
e.g.
SETUP
ENTER
ENTER
ENTER
To Next Page
Loading...
