Toshiba RT-S652 - TOSHIBA RT-S652 Controls and Operation; Overview of Controls and Indicators

| RT—S652
1. OPERATING CONTROLS
CONTROL FUNCTIONS
OOS ©
®@®O™® @©® ©
) @)
©
@ ©® ®
@
[AM]
BAND]
Selector
42)
[LOUDNESS]
Button
When
listening
to
low
level
sound,
press
this
buiton,
(2)
[FUNCTION]
Selector
The treble and bass tones are amplified to give a more
@) FUNCTION [ON-OFF/TAPE] Selector. natural sound.
Note: When the accessory AC adaptor is used, it will be
left powered even when the [FUNCTION] selector
of the recorder is set to OF F/TAPE. [TONE] Control
When the recorder is not to be used, be sure to (8) [BALANCE] Control
unplag the AC adaptor from its outlet.
G3) [VOLUME] Control
Built-in Microphones
@ [TAPE] Selector ) Tweeters (Speakers for high-pitched sound)
[TAPE] selector Woofers (Speakers for iow to mid-range sound)
CrO2 METAL :
t
METAL
=
[BATTERY]
Indicator
cro, 7s @0 [FM STEREO] Indicator
ees
com
@)
[TUNING]
Indicator
Note:
!f
the
[
D238]
button
is
left
depressed,
the
CrOz,
@)
Tape
Counter
and
Counter
Reset
Button
NORMAL position will not be selected even when @ MTSS [SET] Button
the [CrO,] button is pressed.
(5) [/ASTOP/EJECT] Button
(6) [PONE TOUCH RECORD] Button
@ [>> REVIEW/REW) Button
[<PLAY] Button
() {« FF/CUE] Button
4) MTSS [RESET/EDITOR] Button
@5) [REC] Indicator
6) [MTSS] Indicator
@?) Tuning Knob
[MIC] Jacks
Microphones with 3.5 mm plugs
[11PAUSE]
Button
@9
[REC/PB]
Jack
a)
[MODE/BEAT]
Selector
@
[EXT
SPEAKER]
Jacks
Input
impedance
from
3.2
to 8
ohm
[MODE/BEAT]
selector
__MONO
__
|[STEREO-WIDE
Gi)
[PHONES]
[T]
Jack
MONO
62)
[PHONES]
[2]
Jack
STEREO
r
STEREO-WIDE
63
[DC
9
V]
Jack
=
When
accessory
AC
adaptor
is
to
be
used,
connect
it
to
~
this
Jack.
Note: If [MONO] button is left depressed, the STEREO,
STEREO-WIDE mode will not be selected even G4 Telescopic Antenna
when the [STEREO-WIDE]} button is activated.