Toshiba RT-S652 - TOSHIBA RT-S652 Disassembly Guide; Component Removal Procedures

~ RT-S652 |
1.
2. Unscrew two screws (A) and five screws (8). Fig. 1.
. Open the cassette cover by pressing the Stop/Eject
CASSETTE MECHANISM ASS’Y REMOVAL
1. Follow the instruction for Front Cabinet Removal.
MAIN P.C. BOARD REMOVAL
1. Follow the instruction for Front Cabinet Removal.
NS
om F Ww
. Disconnect the speaker and MQJS connectors to
. Reassemble in the reverse order.
. Unscrew one screw (C). Fig. 2.
.
Diconnect
the
Motor
and
the
Head
connectors
©).
. Take off the Cassette Mechanism Ass’y from the Back
. Pull out the Balance, Tone, Volume, Loudness, Mode,
. Pull up the Main P.C. Board from the Back Cabinet.
. Reassemble in the reverse order. DTBID Hd. Tapping 3d x 10mm& RED
2. DISASSEMBLY INSTRUCTIONS
¢———p>
FRONT CABINET REMOVAL DTBID Hd. Tapping
3d x 52mm
Pull out the Tuning and Fine Tuning Knobs.
button.
separate the Front Cabinet from the Back Cabinet.
DTBID Hd. Tapping 3d x 35mm BLK
Figure 1.
Fig. 2.
Cabinet.
Reassemble in the reverse order.
DTBID Hd. Tapping 3d x 20mm RED
Figure 2.
DTBID Hd. Tapping 3d x 16mm RED
Tape Selector, Function and Band Switch Knobs.
Remove the spring ©. Fig. 3.
Unscrew four screws () and two screws @. Fig. 3.
Figure 3.