User’s Manual
8-2
O
PTIONAL
D
EVICES
PC cards
The computer is equipped with a PC card expansion slot that can accommodate
one 5 mm Type II card. Any PC card that meets industry standards (manufac-
tured by TOSHIBA or other vendor) can be installed. The slots support 16-bit PC
cards, including PC card 16’s multifunction card and CardBus PC cards.
CardBus supports the new standard of 32-bit PC cards. The bus provides supe-
rior performance for the greater demands of multimedia data transmission.
Installing a PC card
The PC card slot is located on the left side of the computer. You can install one
Type II card in the slot.
Windows’ hot-install feature lets you install PC cards while the computer’s
power is on.
NOTES: 1. Do not install a PC card while the computer is in standby or
hibernation mode. Some cards might not work properly.
2. An HDD or CD-ROM connected to a 16-bit PC card, might
affect the performance of the computer’s sound system and
data transmission, including slower transmission speeds and
dialing errors.
To install a PC card, follow the steps below.
1. Insert the PC card.
2. Press gently to ensure a firm connection.
Figure 8-1 Inserting the PC card
3. Check the configuration in the HW Setup window to make sure it is appro-
priate for your card.
PC CARD SLOT
PC CARD
To Next Page
Loading...
Need help?
General
