Toshiba Satellite A100 - Sound System; TV Output Signal

9-17
Hardware and system checklist
T
ROUBLESHOOTING
Sound system
TV output signal
Refer also to your Personal Conferencing Kit’s documentation.
Display error occurs Check that the cable connecting the external
monitor to the computer is attached firmly.
If problems persist, contact your dealer.
Problem Procedure
No sound is heard Adjust the volume control dial.
Check the software volume settings.
Make sure the headphone connection is secure.
Check Windows Device Manager. Make sure
the sound function is enabled and that settings
for I/O address, Interrupt level and DMA are cor-
rect for your software and do not conflict with
other hardware devices that you may have con-
nected to the computer.
If problems persist, contact your dealer.
Problem Procedure
Display on TV is poor Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
No display Try adjusting the contrast and brightness con-
trols on the external monitor.
Problem Procedure