User’s Manual
F-2
A
PPENDIX
F
Removing the modem board
To remove the internal modem.
1. Save your data, quit Windows and turn off the power.
2. Disconnect the AC adaptor and any other peripheral devices.
3. Turn the computer upside down and remove the battery pack.
4. Remove one screw securing the modem cover and remove the cover.
5. Remove two screws securing the modem board.
6. Lift out the modem board.
7. Disconnect the modem board cable.
8. Secure the modem board with two screws removed in step 5.
9. Seat the modem board cover and secure it with one screw.
10. Install the battery pack.
The internal modem is approved by Japan Approvals Institute for Telecommuni-
cations Equipment.
A04-0609001
To Next Page
Loading...
