4.26 Fluorescent lamp 4 Replacement Procedures
Satellite A40 Maintenance Manual (960-458) 4-101
3. Remove the source PCB and gate PCB.
1) Remove the source PCB. Be careful not to apply excessive force to the PCB or
TCP when removing the double-sided tape.
2) Remove the gate PCB. Be careful not to apply excessive force to the PCB or TCP
when removing the double-sided tape.
Source PCB
Gate PCB
Figure 4-83 Replacing 15.0 Inch LG.Philips fluorescent lamp (XGA) (3)
To Next Page
Loading...
